Using Zonal Mode
PTZ Dartboard Command and Control
Name of PTZ
camera
Document 800-02951V3 Rev A
11/09
Figure 2-13
Zonal Mode Transforms the Mouse Pointer in PTZ Camera Windows
3
2
1
•
To pan or tilt. Move the mouse pointer onto the video in a PTZ camera window. The
pointer changes to an icon. Nudge the mouse until the arrow points in a direction that
you want it to move. The number next to the arrow indicates how much panning/tilting
will occur after you click (see
arrow that is the furthest from the center.
•
To stop continuous panning or tilting. Move the mouse through the PTZ camera's
window until the pointer changes to an octagon (
•
To zoom. Use the wheel on the mouse, or use the PTZ Dartboard.
•
Using PTZ presets, tours and vectors. While the pointer is in a PTZ camera window,
right-click it. A window menu appears. Make a selection, as needed.
Figure 2-14
Displaying the PTZ Dartboard Control
1.
During a Live session, open and select a PTZ camera window.
Rapid Eye Remote View Operator Guide
Move the mouse over the PTZ camera window until the
pointer changes to a numbered arrow. Click the mouse
to pan or tilt in that direction. Higher values make the
camera pan or tilt more than lower values.
Figure
2-13). For continuous panning or tilting, click the
), then click the mouse button.
PTZ tip
43