Reading The Alarm Log; Displaying The Alarm Log; Inputting A Different Time And Date; Figure 6-11 Alarm Log Search - Honeywell Rapid Eye Operator's Manual

Reading the Alarm Log

Displaying the Alarm Log

Inputting a Different Time and Date

Document 800-02951V3 Rev A
11/09
Video from a Tamper Detection Event
After cameras have been tampered with during an event, video may not be available.
The Alarm Log displays all alarms at all units and their state, whether new, acknowledged
or rearmed.
1. Using View, click the Log tab. The buttons on the View toolbar may change.
2. Leave or select another earliest date and time in the Show Alarms from fields (see
Figure 6-11).
3. Leave or select another latest date and time in the Show Alarms up to fields.
4. Click Display Alarm Log or
Figure 6-11 Alarm Log Search
1. Display the calendar utility by clicking the drop-down arrow next to the date box.
Select a date. Use the left and right arrows to change months.
2. Click on the part of the time that you want to change. Then press
increase/decrease the value. Press
can also enter a value with the keyboard, as needed.
Rapid Eye Remote View Operator Guide
. The alarm log appears in the session pane.
← →
and to move the cursor to another field. You
↑ ↓
and to
93