Listening To Live Audio; Talking To A Multi Site; Figure 8-1 Audio Toolbar - Honeywell Rapid Eye Operator's Manual

Audio

Listening to Live Audio

Channel 1 peak / talk /
listen (PTL) meter

Talking to a Multi Site

110
To listen to a Multi site, click the Channel 1: Listen button on the audio toolbar, the
Channel 2: Listen button or both (see
Figure 8-1 Audio Toolbar
Talk: Listen:
channel 1 channel 1
Listening is metered at the bottom of the peak / talk / listen meter of each channel (see
Figure 8-1). Many users running live sessions to the same Multi site can listen in at once. All
sound sources are mixed at a Multi operator's station, regardless of the number of sites
being monitored at once.
Caution Do not use a dial-up connection for live audio in combination with live
video. Video can be corrupted due to the bandwidth limitations of dial-up.
Recorded video and audio can be saved to a clip and the clip transferred
to an Operator's PC. Only combine Live video with audio on a network
connection.
A Multi-Media unit offers two channels of audio. Each channel of sound can be monitored
independently or together. When the mouse pointer is placed on a button, a tool tip
appears to identify the channel.
Minimizing Background Noise
Background noise can build-up as an operator monitors more sites at the same time. To
reduce this background noise, end the audio monitoring of the Multi sites that you do not
need to monitor.
Click the Channel 1: Talk button on the audio toolbar, the Channel 2: Talk button or both.
Talk is metered in the center of the peak / talk / listen metering of each channel (see
Figure 8-1). An operator can broadcast on one or both channels, and all at once to many
sites that have audio (as many as can be opened).
Figure 8-1).
Channel 2 meter
and buttons