Rear Master Cylinder Removal; Rear Master Cylinder Disassembly - Honda CRF450X 2005 Service Manual

L
Align the brake hose eyelet between the stoppers.
Insta ll the brake hose eyelet with the oil bolt and
new sealing washers.
Tighten the brake hose oil bolt to the specified
torque.
TORQUE: 34 N·m 13.5 kg f·m , 25 Ibf·ft )
Fill and bleed the front brake hydraulic system
(page 16-7).
REAR MASTER CYLINDER
REMOVAL
Drain the rear brake hydra ulic system (page 16-6).
Remove the brake pedal (page 16-24).
Vv1Ien removing the
Remove the brake hose oil bolt, sealing washers
brake hose
011
bolt.
and brake hose eyelet.
CCMlf the end o( the
hose to prevent
contamina tIOn.
Secure the hose to
prevent fluid (rom
leakIng out.
Remove the master cylinder mounting bolts and
rear master cylinder.
DISASSEMBLY
Remove the boot.
Remove the snap ring from the master cylinder
body using the special tool as shown.
TOOL:
Snap ring pliers 079 1 ~SA5000 1
Remove the push rod, master piston and spring .
HYDRAULIC BRAKE
16-15