Gearshift Linkage Installation - Honda CRF450X 2005 Service Manual

CLUTCH / STARTER CLUTCH/KICKSTARTER/GEARSHIFT LINKAGE
11-26
INSTALLATION
Install the drum pin into the hole on the shift drum.
Install the return spring, washer and stopper arm
and tighten th e gearshift stopper arm bolt to the
specified torque.
TORQUE: 12 N'm (1.2 kgf·m , 9 Ibf.ft)
Check the gearshift stopper arm for proper opera-
tion.
M ove the stopper arm out of the way u sing a screw-
~~=:~~~~~i=:
driver.
Align the shift drum center groove with the drum
pin.
Clean and apply locking agent to the gearshift drum
center pin threads and then install it.
Tighten the gea rshift drum center pin to the speci-
fied torque.
TORQUE: 22 N'm (2.2 kgf· m, 16 Ibf.ft)
Set the drum center in a position other than neutral.
Whi le holding the ratchet pawls in pl ace in the
guide plale and drum shifter, Install the drum shifter
assembly by aligning the hole of the drum sh ifter
with the shift drum center pin, and guide plate · UP"
mark facing up.
Install and tighten the guide plate bolts.
Install the shifter collar onto the drum shifter.