Swingarm/Shock Linkage; Rear Suspension Inspection - Honda CRF450X 2005 Service Manual

Motorcycle
Hide thumbs Also See for CRF450X 2005:
Table of Contents

Advertisement

,
Air pressure acts as a
progressive
spring and affects
the entire
fange
of fork
travel.
Air is an
unstable
gas;
it
increases in pressure as
it
is worked (such as in a
fork),
so
the fork
action on
this
motorcycle
will
get
stiffer
as
the
race
progresses.
Release
built
-up air
pressure from
the
fork
legs after
practice and
between
motos.
Be sure the
fork
is fully extended with
the
front
tire
off the ground.
Loosen the
pressu re
release
screws fully,
then
tighten
them.
TORQUE: 1.2 N·m (O.l
kgf·m.
0.9
IbUt)
REAR SUSPENSION INSPECTION
Check the action of the shock absorber by com-
pressing
it
several times.
Lift
the
sub-frame (page 6-11).
Check the entire shock absorber
assembly for
signs
of leaks, damage or
loose
fasteners.
Replace
damaged components which cannot be
repaired.
Tighten all nuts and bolts.
For
shock absorber service (page 15·14).
l
ower
the
sub-frame (page 6-25).
SWINGARM/SHOCK LINKAGE
Raise
the rear
wheel off the ground by placing a
workstand or equiva lent under the engine.
Check for worn swingarm bea
r
ings by grabbing
the
rear
swingarm
and
attempting
to
move
the
swingarm side-to-side.
Replace the bearings if excessively worn (page 15·
39).
Check the shock linkage and replace any damaged
needle bearings.
MAINTENANCE
4-35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents