Lights/Meter/Switches Service Information - Honda CRF450X 2005 Service Manual

,.-.
I
, .
,
(
LIGHTS/METER/SWITCHES
SERVICE INFORMATION
GENERAL
I
NOTICE
•
•
•
•
A halogen headlight bulb becomes very hot while the headlight is ON, and remain hot for
8
while after it is turned OFF.
8e sure to let it cool down before servicing.
Note the following when rep/acing the halogen headlight bulb.
- Wear clean gloves while replacing the bulb. Do not pur finger prints on the headlight bulb, as they may create hot
spots on the bulb and cause is to fail.
- If you touch the bulb with your bare hands, clean
it
with a cloth moistened with denatured alcohol to prevent its early
failure.
- Be
SUfe
to install the dust cover afrer rep/acing the bulb.
Check the battery condit ion before performing any inspection that requires proper battery voltage.
A
continuity test can
be made with the switches installed on the motorcycle.
SPECIFICATIONS
ITEM
Headright
Taillight
Fuse
TORQUE VALUES
Headlight mounting screw
Taillight mounti ng screw
Taillight wire clamp screw
0.7 N·m (0.1 kgf·m, 0.5 Ibf.ft)
4.2 N'm (0.4 kgf·m. 3. 1 Ibf.ft)
0.7 N·m (0.1 kgf·m, 0.5 Ibf.ft)
SPECIFICATIONS
12 V 35W
LED
15 A
20-3