Clutch Lever Removal/Installation - Honda CRF450X 2005 Service Manual

FRONT WHEEUSUSPENSION/STEERING
Install the tripmeter cable guide and tighten the bolt
securelv.
Install the front brake hose guides and tighten the
bolts to the specified torque.
TORQUE: 5.2 N ·m (0.5 kgf·m, 3.8 IbHtj
Install the front fender. coliars and tighten the bolts
secu rely.
After '07: Install the steering damper (page 14-38).
Install the f ollowing :
- Front wheel (page 14. 12)
- Handlebar (page 14-34)
- Front visor 1'05 - '07: page 3-5, After '07: page 3-
6)
CLUTCH LEVER
REMOVAlliNSTAlLA TION
Remove the clutch lever pivot nut, bolt, coilar, "''''',..,.".
14-52
clutch lever and hot start lever.
Apply grease to the sliding surface of the clutch
lever pivot bolt.
Install the clutch lever. hot start lever, collar, clutch
lever pivot bolt and nut.
Tighten the pivot bolt to the specified torque.
Loosen the pivot bolt to 45° - 90°, and tig hten the
pivot nut to the specified torque.
TOROUE:
Clutch lever pivot bolt:
2.0 N 'm (0.2
kgf·m, 1.5 Ibf.ftl - 45° to
90°
Clutch lever pivot nut:
10 N·m (1.0 kgf·m, 7 rbf·ftl
CLUTCH LE VER
CLUTCH LEVER PIVOT BOLT
.
....
NUT
•