Honda CRF450X 2005 Service Manual page 354

REAR WHEEL/SUSPENSION
15-12
Apply grease to new bearing retainer threads.
Install and tighten the bearing retainer to the speci-
fied torque using the special tools.
TOOLS:
Retainer wrench, 48 mm
Retainer wrench body
07YMA·KZ40100
or
07HMA·KS70100
(U.S.A . only)
07710-0010401
TORQUE: 44 N'm (4.5 kgf·m , 32 Ibf.ft)
Peen the edge of the retainer.
Install the driven sprocket.
Install the botts, washers and nuts, and tighten the
nuts to the specified torque.
TORQUE: 32 N·m (3.3 kgf·m , 24 Ibf·tt)
Apply grease to new left dust seal lips, then install
the dust seal.
Install the brake disc onto the wheel hub with the
minimum thickness mark (M IN TH 3.5 mm) facing
out.
Inst all the bolts/nuts.
Tighten the nuts to the specified torque.
TORQUE: 16 N'm {1 .6 kgf·m, 121bf.ftJ
Apply grease t o new right dust seal lips, then install
the dust seal.