Standard Torque Values; Engine And Frame Torque Values - Honda CRF450X 2005 Service Manual

GENERAL INFORMATION
STANDARD TORQUE VALUES
FASTENER TYPE
TORQUE
FASTENER TYPE
N 'm (kgf'm, Ibf.ft)
5 mm hex bolt and nut 5.2 (0.5, 3.81 5
mm screw
6 mm hex bolt and nut
10 (1.0, 7) 6
mm screw
8
mm
hex bolt and nut
22 (2.2, 16) 6 mm flange bolt
10 mm hex bolt and nut 34 (3.5, 25) (8
mm
head)
12
mm
hex bolt and nut
54 (5.5, 40) 6
mm flange
bolt
(10 mm head) and nut
8
mm
fla nge bolt and nut
10
mm
flange bolt and nut
ENGINE & FRAME TORQUE VALUES
• Torque specifications listed below are for specified fasteners .
• Others should be tightened to standard torque values listed above.
NOTE:
1. Apply oil to the threads and seating surface.
2. Apply locking agent to the th reads.
3. Stake.
4. U·nut
5. AlOe bolt/screw; replace with new one.
6. Loosen the bolt 118 to 1/4 turns after tightening it to the specified torque, then tighten the pivot nut.
7. Apply grease to the threads.
8.
uas
nut
9. After '07: Apply molybdenum disulfide grease (T8190 1 or equivalent) to the threads.
lO.Apply Honda Hondalock 3 or equivalent high strength locking agent to th e threads.
ENGINE
MAINTENANCE
Engine oil drain bolt
ITEM
Transmission oil drain bolt
Transmission oil check bolt
Crankshaft hole cap
Decompressor adjuster lock nut
Spark plug
LUBRICATION SYSTEM
ITEM
Oil jet mounting bolt
1-14
Q'TV
, ,
,
,
('05 - '07)
,
,
Q'TY
,
THREAD
TORQUE
OIA. (mm) N'm (kgf·m. Ibf.ftl
8
16 (1.6, 12)
8 16 (1.6, 12)
6 10 (1.0. 7)
30 15(1.5,11)
5
10 (1.0, 7)
,.
2212.2,16)
THREAD
TORQUE
DIA. (mm)
N'm (kgf'm , Ibf.ftl
6 10 (1.0, 7)
TORQUE
N·m (kgf·m. Ibf·ttl
4.2 (0.4, 3.11
9.0 (0.9, 6.6)
9.0 (0.9, 6.6)
1211.2,9)
2712.8, 20)
39 (4.0, 29)
REMARKS
NOTE 1
NOTE 1
NOTE 7
NOTE 1
REMARKS
NOTE 2
•
•