HNDR-S4824
3.9. Using Screen Lock
To set screen lock agaist unauthorized user's controlling when administrator isn't on his deak.
- For this function, user password should be set at first.
- If pressing the [EXIT/LOCK] button for 2~3 seconds, lock mode will run with showing "Screen
Locked" message on the screen. When "User Password" is set as off, the message of "Enable user
password first" shows on the screen.
- If lock mode runs, any function button will not be operated.
- In order to cancel lock mode, user password should be entered.
18
2004.05.31 (v 2.0)
Basic Configuration
Honeywell