Honeywell HNDR-S4824 User Manual page 38

HNDR-S4824 Basic Configuration
Special Time Recording
This menu is to designate different recording conditions during "Special Times." "Special Time" is
designated under the "System" tab.
There are five conditions; No Rec./Low/Standard/High/Same as above.
< Setting Special Time >
To set "Special Time," move to "System" tab.
Up to four zones can be designated as "Special Time."
Event Recording
Press the [ENTER] button to access the Event Recording feature. Set "On/Off" using the ◄ or ► buttons.
Event recording condition is set under the "Alarm Recording" tab.
This setting is used to configure the HNDR-S4824 to record data according to an alarm condition, such as
Motion Detection (MD), sensors, etc.
38 Honeywell
2004.05.31 (v 2.0)