User Sequence Mode - Honeywell HNDR-S4824 User Manual

HNDR-S4824 Basic Configuration

3.4.2. User sequence mode

- Press the [SEQ] button during 1 second or above.
- User sequence is set in "User Sequence Configration" of "Monitor A".
<Note>
1. User sequence mode can be configured up to 16 sets.
2. The example above is when 6 sets. In this case, HNDR-S4824 shows in order; quad spilit screen
(1,2,3,4) full single screen (1) quad spilit screen (5,6,7,8) full single screen (5) full single
screen (8) 9 spilit screens (9,10,11,12,13,14,15,16)
14 Honeywell
2004.05.31 (v 2.0)