Honeywell HNDR-S4824 User Manual page 28

HNDR-S4824 Basic Configuration
Time Zone
Set the time zone using the left/right arrow button on HNDR-S4824 front panel. Every time you press
left/right arrow button, time zone will change. Select the desired time zone. (To move to the previous
menu, press [EXIT] button on HNDR-S4824 front panel.)
Daylight Saving
The Daylight Savings option is linked to Time Zone. Daylight Savings is only activated for time zones
that use Daylight Savings. For example, selecting GMT – 7:00 Arizona will disable the option for
Daylight Savings because Daylight Savings is not used in Arizona. This menu is linked with "Time Zone"
menu. Namely, if selecting daylight saving area in time zone, this menu will be activated. Oppositely if
selected time zone is not enforced, it will not be. It is based on MS Windows. So this menu is for setting
whether you apply ON/OFF (with left/right arrow button on HNDR-S4824 front panel) in daylight saving
area.
Sync with NTP
It is to synchronize time with NTP (Network Time Protocol) server.
28 Honeywell
2004.05.31 (v 2.0)