Network - Honeywell HNDR-S4824 User Manual

HNDR-S4824 Basic Configuration

5.7.6. Network

There are five sub-menus; Network, xDSL, WRS, Port Setting, and NTP Setting.
5.7.6.1. Network
This page is to define network type and set network addresses for HNDR-S4824.
Type
This is to select proper network interface (Ethernet/xDSL) with which HNDR-S4824 is connected. If
HNDR-S4824 is connected with Internet dedicated line, cable modem line or on LAN environment, select
network interface as 'Ethernet.'
If HNDR-S4824 is connected on xDSL line that needs PPPoE process to connect to the Internet,
administrator should select 'xDSL.' However, if the xDSL line does not need PPPoE process,
administrator should select 'Ethernet,' even though HNDR-S4824 is connected on xDSL line.
DHCP
Basically, this menu is for the lines that have Ethernet interfaces such as Internet dedicated line, cable
modem line and LAN. If administrator activates 'DHCP' menu, all addresses are set automatically by
HNDR-S4824 detecting them from DHCP server of your ISP. The detected addresses are not displayed
on the screen. The addresses do not need to be entered manually unless 'DHCP' is disabled.
54 Honeywell
2004.05.31 (v 2.0)