Honeywell HNDR-S4824 User Manual page 59

Basic Configuration HNDR-S4824
5.7.6.5. NTP Setting
NTP (Network Time Protocol) makes time of Network devices synchronize. They are composed of a
central server for supplying standard time via Network and a client for receiving the synchronized time
with connecting the server.
NTP Mode
Set HNDR-S4824's NTP mode between Client and Server.
NTP Server Loc.
It is possible to set after setting NTP Mode as "Client". Set whether NTP server is on Local Network or
Internet (Public).
NTP Local Server IP
It is possible to set after setting NTP Server Loc. as "Local". Set the server's IP address. Set NTP server's
IP address on local Network or the IP address of HNDR-S4824 that is set as server in NTP mode.
Interval (min)
Set a synchronizing interval.
<Note>
When NTP mode is set as "Client", "Sync with NTP" of "Time Setting" should be as "On".
Honeywell 59
2004.05.31 (v 2.0)