Using Auxiliary On; Using Auxiliary Off; Using Relay - Honeywell HNDR-S4824 User Manual

Basic Configuration

3.7.6. Using Auxiliary On

To use a special function of PTZ device at live monitoring mode.
- Select a channel after pressing the [SELECT] button.
- Press the [MENU] button.
- Select "Auxiliary On".
- Press a number for running special function. (Aux function can be supported upto 16)

3.7.7. Using Auxiliary Off

To stop a special function of PTZ device at live monitoring mode.

3.8. Using Relay

To set relay on/off. (HNDR-S4824 supports four relay outputs.)
- Press the [ACK/RELAY] button.
- The icon of "Relay On" shows on the screen.
- Press the relay number button between 1 and 4, and then the related relay out signal will be transmitted.
- In order to set relay off, press the [ACK/RELAY] button again.
- Then "Relay On" shows because relay keeps being set as on.
- Press the [ACK/RELAY] button again, and then the icon of "Relay Off" will show.
- Press the relay a number button to set off.
Honeywell
2004.05.31 (v 2.0)
HNDR-S4824
17