Browsing With Sequence Mode; Figure 4-2 Page Sequence - Honeywell HRSD16 User Manual

Operation
2.
3.

Browsing with Sequence Mode

Using the Sequence mode, you can browse through a series of single-view or
multi-view formats, depending on which format you have chosen.
Entering the Sequence Mode
Press and hold SEQUENCE for two seconds or longer to display the cameras
sequentially.
If you choose...
Full Sequence
Cameo Sequence
One of the multi-view
formats
For example, if you press SEQUENCE while in the 2x2 format, the DVR changes pages
in the following pattern:
If all the cameras in a page are Off, have lost video, or are set to Covert (unless the user
has authority to view covert cameras), then that page is excluded from the sequence.
Document 800-00918 Rev F
02/08
Adjust the image using the arrows.
Load settings by selecting OK and pressing
Note Any image adjustments you make are applied to both the live
video on the monitors and the recorded video.
Figure 4-2 Page Sequence
Note In the Display setup screen (Sequence tab), select Full
Sequence for full sequence monitoring or Cameo Sequence for
cameo sequence monitoring.
After you've pressed SEQUENCE, the DVR...
Goes through predefined screen layouts
Displays live cameras sequentially in the bottom
right screen
Goes to the next page
.
107