Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 23

Chapter 1 Overview
Cisco Nexus 7000 Series
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
If you install one chassis, install it at the lowest possible RU on the rack for stability, as shown in
Figure 1-4. If you install two chassis in the same rack, install the bottom chassis first and then install the
other chassis on top as shown in Figure 1-5.
Warning Stability hazard. The rack stabilizing mechanism must be in place, or the rack must be bolted to the
floor before you slide the unit out for servicing. Failure to stabilize the rack can cause the rack to tip
over. Statement 1048
Figure 1-4 One Cisco Nexus 7010 Chassis Installed in a Four-Post Rack
Install the first chassis at the
bottom of the rack for maximum
stability.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
1-5
OL-18634-01