Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 130

EPLD Configuration
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
To upgrade EPLDs for a fabric module, follow these steps:
Determine which fabric modules are present on the Cisco Nexus 7000 Series device.
Step 1
switch# show module xbar
Xbar Ports
---
1
2
3
Xbar Sw
---
1
2
4
Xbar MAC-Address(es)
-------------------------------------------
1
2
4
* this terminal session
Install the EPLD images for a fabric module by entering the install xbar-module slot_number epld url
Step 2
command.
switch# install xbar-module 1 epld bootflash:n7000-s1-epld.4.0.2.img
EPLD image file , built on Fri May 16 20:36:39 2008
EPLD
-------------------------------------------------------
Power Manager
WARNING: Upgrade process could upto 30 minutes.
Module could be powered down and up.
Xbar Module 1 will be powered down now!!
Do you want to continue (y/n) ?
Confirm the upgrade by entering Y for yes.
Step 3
Do you want to continue (y/n) ?
To confirm the EPLD upgrade, see the
page
Upgrading EPLDs for a Fan Tray Module
You can upgrade EPLDs for fan tray modules while the system is operational.
To upgrade EPLDs for a fan tray module, follow these steps:
Display fan tray information, such as the module numbers and fan tray types.
Step 1
switch# show environment fan
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
6-36
Module-Type
----- -------------------------------- ------------------ ------------
0 Xbar
0 Xbar
0 Xbar
Hw
-------------- ------
NA 0.404
NA 0.405
NA 0.405
NA
NA
NA
6-38.
Model
N7K-C7010-FAB-1
N7K-C7010-FAB-1
N7K-C7010-FAB-1
World-Wide-Name(s) (WWN)
----------------------------------------------------
--
--
--
Serial-Num
------------------
JAB114700WL
JAB115000LU
JAB115000LJ
Curr Ver New Ver
2.7 2.8
[n]
[n] y
"Displaying EPLD Versions for a Fabric Module" section on
Chapter 6 Managing the Device Hardware
Status
ok
ok
ok
OL-18634-01