Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 104

Power Supply Configuration Modes
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Table 6-2
Dual inputs per power supply unit
Single input per power supply unit
SUMMARY STEPS
1.
2.
DETAILED STEPS
To configure the power supply mode, follow these steps:
Command
Step 1
config t
Example:
switch# config t
switch(config)#
Step 2
power redundancy-mode
combined|ps-redundant|insrc-redundant|
redundant
Example:
switch(config)# power redundancy-mode
redundant
switch(config)#
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
6-10
Power Availability for 7.5-kW Power Supply Units
220-V and 220-V inputs
1 power supply unit
2 power supply units
3 power supply units
4 power supply units
220-V input
1 power supply unit
2 power supply units
3 power supply units
4 power supply units
config t
power redundancy-mode mode
Chapter 6
Power
Supply
Combined Redundancy
Mode Mode
7500 W —
15,000 W 7500 W
22,500 W 15,000 W
30,000 W 22,500 W
3750 W —
7500 W 3750 W
11,250 W 7500 W
15,000 W 11,250 W
Purpose
Enters configuration mode.
Configures one of the following power supply modes:
For combined mode, use the combined keyword.
•
For power supply redundancy, use the
•
ps-redundant keyword.
For input source redundancy, use the
•
insrc-redundant keyword.
For full redundancy, use the redundant keyword.
•
Managing the Device Hardware
Input Source Full
Redundancy Redundancy
Mode Mode
3750 W —
7500 W 7500 W
11,250 W 11,250 W
15,000 W 15,000 W
— —
— —
— —
— —
OL-18634-01