Changing The System/Codec Password - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set
AdministrAtor guide
Table of contents Introduction
Changing the system/codec
password
You sign in to the web interface with the same user name and
password as for the video conference system.
NOTE: We strongly recommend that you set a password for
the default admin user, and any other users with ADMIN rights,
to restrict access to system configuration.
You can read more about password protection in the
Password protection appendices.
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved.
Web interface Web interface Advanced settings
4. Set the new password
Press Change password
the change to take effect.
Appendices
Enter your current and new passwords as
requested. If the password currently is not
set, leave the
for
8
1. Click your
user name
2. Open the Change
Password dialog box
Select Change password
in the drop down menu.
3. Enter passwords
Current password field blank.
www.cisco.com