Changing The System/Codec Password - Cisco Telepresence MX300 Administrator's Manual

Cisco TelePresence MX Series
AdministrAtor guide
Table of contents Introduction
Changing the system/codec
password
You sign in to the web interface with the same user name and
password as for the video conference system.
NOTE: We strongly recommend that you set a password
for the default admin user, and any other users with ADMIN
rights, to restrict access to system configuration.
You can read more about password protection in the
Password protection section.
D14850.02 MX Series Administrator Guide (TC5.0) | 2011 NOVEMBER | © 2011 Cisco Systems, Inc. All rights reserved.
Web interface Web interface Advanced settings
4. Set the new password
Click Change password
the change to take effect.
Appendices
Enter your current and new passwords as
requested. If the password currently is not
set, leave the
for
12
1. Click your
user name
2. Open the Change
Password dialog box
Select Change password
in the drop down menu.
3. Enter passwords
Current password field blank.
www.cisco.com