The Rtp Settings - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set
AdministrAtor guide
Table of contents Introduction
The RTP settings
RTP Ports Range Start
Specify the first port in the range of RTP ports. See also the "H323 Profile [1..1] PortAllocation"
command.
Requires user role: USER
Value space: <1024..65502>
Range: Select a value from 1024 to 65502.
Example: RTP Ports Range Start: 2326
RTP Ports Range Stop
Specify the last RTP port in the range. See also the "H323 Profile [1..1] PortAllocation"
command.
Requires user role: USER
Value space: <1056..65535>
Range: Select a value from 1056 to 65535.
Example: RTP Ports Range Stop: 2486
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings Advanced settings Appendices
51
www.cisco.com