User Administration - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set
AdministrAtor guide
Table of contents Introduction
User administration
From this page you can manage the user accounts of your
video conference system. You can create new user accounts,
edit the details of existing users, and delete users.
The default user account
The system comes with a default administrator user account
with username admin and no password set. The
has full access rights, and it is highly recommended to set a
password for this user.
Read more about passwords in the Password protection
appendices.
About user roles
A user account must hold one or a combination of several
user roles. Three user roles exist, representing different
rights:
• ADMIN: A user holding this role can create new users and
change all settings, except the security audit settings. He
cannot upload audit certificates.
• USER: A user holding this role can make calls and search
the phonebook.
• AUDIT: A user holding this role can change the security
audit configurations and upload audit certificates.
It is important to note that these three roles have
overlapping rights.
An administrator user account with full access rights, like the
default admin user, must possess all the three roles.
Security mode
You can enable/disable the strong security mode from this
page. You must read the warning carefully and check the
I understand the risks... box before you can enable the strong
security mode.
Strong security mode sets very strict password requirements,
and requires all users to change their password on the next
sign in.
Software upload from TMS, web snapshots and making calls
from the web interface are prohibited in strong security mode.
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved.
Web interface Web interface Advanced settings
admin user
non-
Maintenance
Software Upgrade
Certificate Management
Audit Certificate

User Administration

Restart
Factory Reset
Appendices
23
Default user account
The system comes with
admin as the default
user account. This user
has full access rights.
www.cisco.com