Wireless Ap - NETGEAR JR6150 User Manual

6. Click the Add button.
The screen changes back to the list screen.
7. Add each computer or device that you want to allow to connect wirelessly.
8. Select the Turn Access Control On check box.
9. Click the Apply button.
To edit a wireless device or delete it from the access list:

1. Log in to the router.
For more information, see
2. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings screen displays.
3. In the table, select the radio button next to the wireless device that you want to edit or delete.
4. Do one of the following:
• Click the Edit button.
The Edit Wireless Card screen displays.
a. Edit the address information.
b. Click the Accept button.
• Click the Delete button.
The address is removed from the table.

Wireless AP

The router can function in access point (AP) mode instead of regular router mode. In AP
mode, the router can function as a bridge between wireless clients and another router or
gateway in your network that connects to the Internet. When the router functions in AP mode,
many router functions are disabled, but wireless clients can connect to the router. You can
still access the router to change the configuration, for example, to disable AP mode and
return to regular router mode.
To enable and configure AP mode:

1. Log in to the router.
For more information, see
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
Use NETGEAR genie after Installation
Advanced Settings
112
on page 17.
on page 17.