Static Routes - NETGEAR JR6150 User Manual

Note: Before you set up Dynamic DNS on router, first register an account
with one of the Dynamic DNS service providers whose URLs display
in the Service Provider list on the Dynamic DNS screen.
To set up Dynamic DNS:

1. Log in to the router.
For more information, see
2. Select ADVANCED > Advanced Setup > Dynamic DNS.
3. Select the Use a Dynamic DNS Service check box.
4. Select the URL of your Dynamic DNS service provider.
5. Type the host name (or domain name) that your Dynamic DNS service provider gave you.
6. Type the user name for your Dynamic DNS account.
This name is the name that you use to log in to your account, not your host name.
7. Type the password (or key) for your Dynamic DNS account.
8. Click the Apply button.
9. To verify the Dynamic DNS status, click the Show Status button.

Static Routes

Static routes provide more routing information to your router. Under usual circumstances, the
router has adequate routing information after it has been configured for Internet access, and
you do not need to configure more static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets on your network.
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
Advanced Settings
132
on page 17.