Bandwidth Control - NETGEAR JR6150 User Manual

2. Select ADVANCED > Setup > QoS Setup.
3. Select the Turn Internet Access QoS On check box.
WMM QoS is enabled by default. NETGEAR recommends that you leave this setting as it
is for full 802.11n wireless rate support.
4. To limit the bandwidth that is available for traffic from the router to the Internet, select the
Turn Bandwidth Control On check box.
For more information, see
5. Manage the QoS rules.
For more information about how to manage and create QoS rules, which are also referred
to as QoS policies, see
6. To allocate half of the WAN bandwidth to a special host in heavy traffic situations, select
the Enable Trusted IP address check box.
In the field that is provided, enter the IP address of the trusted host.
7. Click the Apply button.
Your settings are saved.

Bandwidth Control

Bandwidth control lets you set a limit to the bandwidth that is available for traffic from the
router to the Internet.
To set the maximum uplink bandwidth:

1. Log in to the router.
For more information, see
A750 Wireless Dual Band Gigabit Router JR6150
Bandwidth Control
Manage QoS Rules
Use NETGEAR genie after Installation
genie ADVANCED Home
53
on page 53.
on page 54.
on page 17.