NETGEAR JR6150 User Manual page 128

2. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
3. Select the Port Triggering radio button.
4. Clear the Disable Port Triggering check box if it is selected.
If the Disable Port Triggering check box is selected after you configure
Note:
port triggering, port triggering is disabled. However, any port triggering
configuration information you added to the router is retained even though it is
not used.
5. In the Port Triggering Time-out field, enter a value up to 9999 minutes.
The default value is 20 minutes. This value controls the inactivity timer for the designated
inbound ports. Because the router cannot detect when the application has terminated, the
A750 Wireless Dual Band Gigabit Router JR6150
Advanced Settings
128