NETGEAR JR6150 User Manual page 135

9. Type the gateway IP address, which must be a router on the same LAN segment as the
A750 Wireless Dual Band Gigabit Router.
10. Type a number from 1 through 15 as the metric value.
This value represents the number of routers between your network and the destination.
Usually, a setting of 2 or 3 works, but if this link is a direct connection, set it to 1.
11. Click the Apply button.
The route is added to the table on the Static Routes screen.
To edit or delete a static route:

1. Log in to the router.
For more information, see
2. Select ADVANCED > Advanced Setup > Static Routes.
3. In the table, select the radio button next to the route that you want to edit or delete.
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
Advanced Settings
135
on page 17.