Advanced Wireless Settings; Control The Wireless Radio - NETGEAR JR6150 User Manual

Advanced Wireless Settings

You can turn the wireless radio on and off, specify WPS settings, and set up a wireless
access list.
The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen
are reserved for wireless testing and advanced configuration only. Do not change these
settings unless you have a specific reason to do so.

Control the Wireless Radio

By default, the wireless radio is enabled so that you can connect wirelessly to the router. You
can turn the wireless radio on or off in the Advanced Wireless Settings screen or by using the
Wireless On/Off button on the router front panel. When the wireless radio is off, you can still
use an Ethernet cable for the WAN and LAN connections to the router.
To turn the wireless radios on or off:

1. Log in to the router.
For more information, see
2. Select ADVANCED > Advanced Setup > Wireless Settings.
The 2.4 GHz and 5 GHz WiFi bands are configured separately. By default, the Enable
Wireless Router Radio check boxes are selected.
3. Select or clear the Enable Wireless Router Radio check box.
Clearing this check box turns off the WiFi feature of the wireless router.
4. To specify the times when you do not need a wireless connection, select the Turn off
wireless signal by schedule check box and enter the information in the fields provided.
For example, you could turn off the wireless signal for the weekend if you leave town.
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
Advanced Settings
107
on page 17.