Table of Contents
Advertisement
3.
Click the Edit button.
4.
Scroll down to the Available Networks Folder section of the screen. The following
information displays:
•
Share Name. If only one device is connected, the default share name is
USB_Storage. (Some router models have more than one USB port.)
You can click the name, or you can type it in the address field of your web browser. If
Not Shared is shown, the default share was deleted and no other share for the root
folder exists. Click the link to change this setting.
•
Read Access and Write Access. Show the permissions and access controls on the
network folder. All – no password (the default) allows all users to access the network
folder. The password for admin is the same one that you use to log in to the router.
•
Folder Name. Full path of the network folder.
•
Volume Name. Volume name from the storage device (either USB drive or HDD).
•
Total Space and Free Space. Show the current utilization of the storage device.
To add a network folder:
1.
Log in to the router.
For more information, see
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
USB Port
71
on page 17.
Advertisement
Table of Contents
Troubleshooting
