Table of Contents
Advertisement
Internet Setup
You can view or change ISP information.
To set up your Internet connection:
1.
Log in to the router.
For more information, see
2.
Select BASIC > Internet.
3.
Select one of the following radio buttons:
•
Yes. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
•
No. Enter the account and domain names, only if needed.
These fields display when no login is required:
•
Account Name (If required). Enter the account name provided by your ISP. This
might also be called the host name.
•
Domain Name (If required). Enter the domain name provided by your ISP.
These fields display when your ISP requires a login:
•
Internet Service Provider. Select PPPoE, L2TP, or PPTP.
•
Login. The login name provided by your ISP. This login name is often an email
address.
•
Password. The password that you use to log in to your ISP.
•
Service Name (if Required). If your ISP provided a service name, enter it here.
•
Connection Mode. Select Always On, Dial on Demand, or Manually Connect.
•
Idle Timeout (In minutes). If you want to change the login time-out, enter a new
value in minutes. This setting determines how long the router keeps the Internet
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
genie BASIC Settings
24
on page 17.
Advertisement
Table of Contents
Troubleshooting
