NETGEAR JR6150 User Manual page 97

A750 Wireless Dual Band Gigabit Router JR6150
- Default Gateway. The IP address for the default gateway that the router
communicates with.
- DHCP Server. The IP address for the Dynamic Host Configuration Protocol
server that configures the TCP/IP for all the computers that are connected to the
router.
- DNS Server. The IP address of the Domain Name Service server that translates
of network names to IP addresses.
- Lease Obtained. The date and time when the lease was obtained.
- Lease Expires. The date and time that the lease expires.
Choose any of the following actions:
a. To release the router's IP address and terminate the Internet connection, click
the Release button.
b. To let the router acquire an IP address from the DHCP server and start the
Internet connection, click the Renew button.
c. To close the Connection Status screen, click the Close Window button.
The content of the Connection Status pop-up screen depends on the type of connection.
• PPPoE connection:
The Connect and Disconnect buttons in the Connection Status screen display only
when the connection mode is Manually Connect.
The following information displays for a PPPoE connection:
• Connection Time. The time that elapsed since the connection was established.
• Connection Status. The status of the connection: Connected, Disconnected,
Negotiation (---, Success), or Authentication (---, Success). --- indicates failure.
• IP Address. The IP address that is assigned to the router.
• Subnet Mask. The subnet mask that is assigned to the router.
Choose any of the following actions:
a. To establish the PPPoE connection manually, click the Connect button.
b. To terminate the PPPoE connection manually, click the Disconnect button.
c. To close the Connection Status screen, click the Close Window button.
The content of the Connection Status pop-up screen depends on the type of connection.
• PPTP connection:
The Connect and Disconnect buttons in the Connection Status screen display only
when the connection mode is Manually Connect.
The following information displays for a PPTP connection:
• Connection Status. The status of the connection: Connected or Disconnected.
• IP Address. The IP address that is assigned to the router.
• Subnet Mask. The subnet mask that is assigned to the router.
Administration
97