GE MDS SD Series Technical Manual page 90

TFTP
Reprogramming
Remote
Reprogramming
82
The
TFTP Reprogramming
file transfers and selections for retrieving files, such as radio firmware
or configuration files.
• —Use this field to enter a valid IP address for the host com-
Host IP
puter (where file to be transferred resides).
• —This field is used to enter the exact name of the file to be
File
imported or exported.
• —Determines the amount of time (in seconds) that the
Timeout
radio should wait for a TFTP server to respond. The default set-
ting is 20 seconds and will not normally require any change. If a
change is needed, enter a new timeout value in this field.
When all of the above fields have been set and you are ready to load a
new file, click the
Retrieve File
The transceiver has facilities for reprogramming key settings of other
radios in the network. These functions are contained on the
screen shown below. Additional information on remote repro-
gramming
gramming is given in "Over-the-Air Firmware Upgrades" on Page 94.
SD Series Technical Manual
screen contains settable parameters for TFTP
button to begin reprogramming.
Remote Repro-
MDS 05-4846A01, Rev. H