GE MDS SD Series Technical Manual page 80

Encryption Phrase
Dlink Encryption
Phrase
72
NOTE: If the radio login password is lost or forgotten, contact GE
MDS for assistance. Proof of authorized user is required for a
new password, and the radio will revert to its default settings.
It is recommended that users periodically export their config-
uration file so that it can be loaded back into the radio if their
old one requires replacement.
• —If encryption has been enabled, a valid "phrase"
Encryption Phrase
must also be set. Both the sending and receiving station must have
the same phrase for communication to occur. The phrase must
have at least 8 characters (maximum of 38), and any printable
character may be used.
•
Dlink Encryption Phrase
in Transparent mode, a valid "phrase" must be set for the use
Dlink Encryption. Both the sending and receiving station must
have the same phrase for communication to occur. The phrase
must have at least 8 characters (maximum of 38), and any print-
able character may be used. Transparent w/AES Encryption
requires an all SD radio network.
SD Series Technical Manual
—If AES encryption has been enabled while
MDS 05-4846A01, Rev. H