Technical Specifications - GE MDS SD Series Technical Manual

MDS 05-4846A01, Rev. H
8.5

Technical Specifications

GENERAL
Frequency Range:
Specific frequency authorizations are dependent on the type-approval of the radio. Consult fac-
tory for details.
Occupied Bandwidths:
NOTE: This information subject to change depending on specific modem configuration. For
emission designator information, consult the FCC website for latest "GE MDS" grants:
http://transition.fcc.gov/oet/ea/fccid/. Emission designators are subject to change pending new
FCC additions and approvals.
RECEIVER
Maximum Usable Sensitivity:
NOTE: Typical sensitivity rating at 9600 BPS. See modem type listing in Section 6.0 for detailed
ratings.
TRANSMITTER
Carrier Power:
Power Measurement Accuracy:
Duty Cycle:
Output Impedance:
FCC ID:
IC ID:
SD Series Technical Manual
SD1: 150-174 MHz
SD2: 216-235 MHz in one of the following bands:
Band A—216 to 220 MHz
Band B—220 to 222 MHz
Band C—220 to 235 MHz
Band D—216 to 220 MHz (50 kHz B/W)
SD4: 300–512 MHz in one of the following bands:
Band A—350 to 400 MHz
Band B—400 to 450 MHz
Band C—450 to 512 MHz
Band D—300-360 MHz
SD9: 820–960 MHz in one of the following bands:
Band A—820 to 870 MHz
Band B (not currently used)
Band C—928 to 960 MHz
Band D—928 to 960 MHz (50 kHz B/W)
Band E—880 to 915 MHz
Band F—880 to 915 MHZ (50 kHz B/W)
Band G—850 to 860 MHz/926 to 936 TX LO
Band H—850 to 860 MHz/926 to 936 TX HI
SD1: 6.25,12.5, 25.0 kHz
SD2: 5.0, 6.25, 9.0, 12.5, 25.0, 50.0 kHz
SD4: 6.25, 12.5, 25.0 kHz
SD9: 5.0, 12.5, 25.0, 50.0 kHz
–6
–112 dBm at 1x10 BER (9600 BPS)
0.1 Watts to 5 Watts
+/- 1.5 dB
Continuous
50 
SD1: E5MDS-SD1
SD2: E5MDS-SD2-1
SD4: E5MDS-SD4
SD9: E5MDS-SD9-1
SD1: 101D-SD1
SD2: 101D-SD2-1
SD4: 101D-SD4
SD9: 101D-SD9-1
101