GE MDS SD Series Technical Manual page 76

COM2 Port Settings
68
• —The default data format for the transceiver is 8 char-
Data Format
acter bits, no parity, and 1 stop bit (8N1). A number of settings are
possible as listed below:
8 character bits, no parity, 1 stop bit (Default)
8 character bits, no parity, 2 stop bits
8 character bits, odd parity, 1 stop bit
8 character bits, odd parity, 2 stop bits
8 character bits, even parity, 1 stop bit
8 character bits, even parity, 2 stop bits
7 character bits, no parity, 1 stop bit
7 character bits, no parity, 2 stop bits
7 character bits, odd parity, 1 stop bit
7 character bits, odd parity, 2 stop bits
7 character bits, even parity, 1 stop bit
7 character bits, even parity, 2 stop bits
• —Any combination of the three Virtual Radio
Talk on/Listen to
Channels may be entered in these fields. Refer to the SD
Serial/Telnet Management Supplement, Part No. 05-6193A01 for
more information.
• —Indicates whether the radio's Terminal Server is
Term Srvr Status
enabled or disabled.
is the standard port used for connection of serial payload data. The
COM2
screen contains a number of settings that may be con-
COM2 Port Settings
figured to suit the needs of your system.
• —The
COM2
Mode
mode. The default is RS-232.
• —The default data rate for
Baud Rate
be set to any of the following speeds: 300, 1200, 2400, 4800,
9600, 19200, 38400, 57600, 115200.
• —The default data format for the transceiver is 8 char-
Data Format
acter bits, no parity, and 1 stop bit (8N1). A number of settings are
possible as listed below:
8 character bits, no parity, 1 stop bit (Default)
8 character bits, no parity, 2 stop bits
8 character bits, odd parity, 1 stop bit
8 character bits, odd parity, 2 stop bits
8 character bits, even parity, 1 stop bit
8 character bits, even parity, 2 stop bits
7 character bits, no parity, 1 stop bit
7 character bits, no parity, 2 stop bits
7 character bits, odd parity, 1 stop bit
7 character bits, odd parity, 2 stop bits
7 character bits, even parity, 1 stop bit
7 character bits, even parity, 2 stop bits
SD Series Technical Manual
port can operate in either RS-232 or RS-485
COM2
is 9600 bps, but it may
MDS 05-4846A01, Rev. H