GE MDS SD Series Technical Manual page 72

64
2. Navigate to the
COM2 Port Settings
configure them as listed below (note that VRCs are not used):
Mode: RS232
Baud Rate: 115200 bps
Format: 8 char bits, no parity, 1 stop bit
Buffer: Data Handling ON
Device: DCE
Talk on: VRC-1
Listen to: ALL
3. Click
Commit Configuration
To test the functionality of the Terminal Server, open a HyperTerminal
session on PC1 and connect to the Remote 1Terminal Server as shown
in Figure 33.
Figure 33. Remote 1 Terminal Server Connection
On PC2, open a HyperTerminal session and connect to Remote 1's
COM2 port as shown in Figure 34.
Figure 34. Remote 1 COM2 Port Connection
On PC1, open a HyperTerminal session and connect to Remote 2 Ter-
minal Server as shown in Figure 35.
SD Series Technical Manual
of Remote 1 and Remote 2 and
after the changes are made.
Invisible place holder
Invisible place holder
MDS 05-4846A01, Rev. H