Ext 1/2/3/4; Line; Reboot; Restart - Linksys SPA921-NA Administrator's Manual

900 series
Table of Contents

Advertisement

Chapter 4
LCD Command Reference Guide

Ext 1/2/3/4

Shortcut: Menu, 11, 2 or 3 or 4 or 5 select
To see the settings for an extension, from the Status menu, press 2 for Ext 1, 3 for Ext 2, 4 for Ext 3, and
5 for Ext 4.
The LCD displays Registered if the extension is registered, the last registration date and time, and the
time in seconds until the next registration. If the extension is not registered, the phone displays Not
Registered.

Line 1, 2,3,4

Shortcut: Menu, 11, 6 or 7 or 8 or 9 select
To see the settings for a line, from the Status menu, press 6 for Ext 1, 7 for Ext 2, 8 for Ext 3, and 9 for
Ext 4. The display shows the status of the line including if the line is ready and what tone is used.

12 Reboot

Shortcut: Menu, 12, ok
This option lets the user reboot the phone. To select Reboot, press the Menu button and press 12, or scroll
down until the selection is highlighted and then press select soft key. The LCD displays Confirm
System Reboot ?. The display shows two options Reboot or Cancel. Select Reboot to reboot the phone.
The option is only displayed for 5 seconds. After 5 seconds, the display returns to the Menu option.

13 Restart

Shortcut: Menu, 13, ok
This option lets the user restart the phone. To select Restart, press the Menu button and press 13, or scroll
down until the selection is highlighted and then press the select soft key.
The menu displays Confirm System Restart? This display shows the options ok or cancel. Select ok to
restart the phone. This option is only displayed for 5 seconds. After 5 seconds, the display is returned to
the Menu option.

14 Factory Reset

Shortcut: Menu, 14, ok
This option lets the user reset the parameters to the factory settings. To select Factory Reset, press the
Menu button and press 14, or scroll down until the selection is highlighted and press the select soft key.
The menu displays All parameters are reset to factory default values, continue? The display shows
two options: ok or cancel. Select ok to change the settings of the phone to the factory default settings.
This option is only displayed for 5 seconds. After 5 seconds, the display is returned to the Menu option.
Document Version 3.0
Linksys 900 Series IP Phone Administrator Guide

12 Reboot

4-13

Advertisement

Table of Contents
loading

Table of Contents