Call Forward; Speed Dial; Supplementary Services; Audio Volume - Linksys SPA921-NA Administrator's Manual

Chapter 5 SPA900 Series Phone Field Reference
User Tab
This section describes the fields for the following headings on the User 1 and User 2 tabs:
•
•
•
•
•
User 1/2 refers to the subscriber of Line 1 or Line 2. When a call is made from Line 1 or Line
2, 900 Series phone shall use the user and line settings for that Line; there is no user login
support in 900 Series phone v1.0. Per user parameter tags must be appended with [1] or [2]
(corresponding to line 1 or 2) in the configuration profile. It is omitted below for readability.

Call Forward

Field
Cfwd All Dest
Cfwd Busy Dest
Cfwd No Ans Dest
Cfwd No Ans Delay
Document Version 3.0
Call Forward, page 5-47
Speed Dial, page 5-48
Supplementary Services, page 5-48
Audio Volume, page 5-49
Phone GUI Menu Color Settings (SPA962), page 5-49
Description
Forward number for Call Forward All Service
In addition to normal call forward destination as used in the other ATAs, on the
SPA3102, you can specify the following additional parameters:
•
gw0 – forward the caller to use the PSTN gateway
•
<pstn-number>@gw0 – forward to caller to the PSTN number (dialed automatically
by the SPA through the PSTN gateway)
The default is blank.
Forward number for Call Forward Busy Service. Same as Cfwd All Dest.
The default is blank.
Forward number for Call Forward No Answer Service. Same as Cfwd All Dest.
In addition to normal call forward destination as used in the other ATAs, on the
SPA3102, you can specify the following additional parameters:
•
gw0 – forward the caller to use the PSTN gateway
•
<pstn-number>@gw0 – forward to caller to the PSTN number (dialed automatically
by the SPA through the PSTN gateway)
The default is blank.
Delay in sec before Call Forward No Answer triggers. Same as Cfwd All Dest.
The default is 20.
Linksys 900 Series IP Phone Administrator Guide
User Tab
5-49