Linksys SPA921-NA Administrator's Manual page 69

900 series
Table of Contents

Advertisement

Chapter 3
Managing Linksys 900 Series IP Phones
The user can assign a default ring tone for each extension. The user can assign a ring tone for
each personal directory entry (which overrides the default ring tone). Ring tone can be selected
from the user interface. In addition, the 900 Series phone allows two user-downloadable ring
tones. Therefore a total of 12 ring tone choices are available as the default ring for an extension
or assigned to individual callers in the personal directory.
User-downloaded ring tone are labeled User 1 and User 2 in the choices for <Default Ring>.
On the phone ring tone menu, the User 1 and 2 choices are replaced by the corresponding name
of the ring tone or Not Installed if the user ring tone slots have not been used.
The user ring tone (1 or 2) can be downloaded using the phone web interface with the link:
http://phone_ip_addr/ringtone1[?<url>]
Where <url> syntax is [tftp://][host[:port]]/<path>.
Only TFTP is supported. If the host is not specified, the TFTP host is the web client. The
default port is 69. To remove the User 1 ring tone from the phone, set the <path> to delete, as
follows:
http://phone_ip_addr/ringtone1?/delete
The link is case sensitive.
For ring tone User 1 and User2, the cadence is fixed with the on-time equals to the duration of
the ring tone file and off-time equals to four seconds. The total ring duration is fixed at 60
seconds. The user ring tone names displayed on the phone LCD are derived from the ring tone
file header file.
There is no need to reboot the phone after downloading a ring tone. However, if the phone is
already in ring tone LCD menu while the new ring tone is downloaded, you need to exit and
re-enter the ring tone menu to see the new ring tone name on the menu.
To convert a file for use as a ringtone, use the Upload Ringtone utility available from the
Linksys website:
http://www.sipura.com/Documents/ringtone.zip
Figure 3-5
Document Version 3.0
illustrates the user interface provided by this utility.
Linksys 900 Series IP Phone Administrator Guide
Using Call Features
3-21

Advertisement

Table of Contents
loading

Table of Contents