Table of Contents
Advertisement
Chapter 4
LCD Command Reference Guide
To change the phone to use a Non DHCP NTP Server 1, press the edit soft key. The display shows the
option to enter an IP address. enter the IP Address of the NTP Server1. This IP address is always used
by the phone, it is a static IP address. Erase mistaken numbers, one at a time using the delChr soft key.
After IP address has been entered, press ok. The display returns to the Non DHCP NTP Server1 setting.
The phone uses the IP address immediately.
9.14 Non DHCP NTP Server 2
Shortcut: Menu, 9, 14,
To edit the secondary NTP server used by the phone, press 14 from the Network menu, or scroll down
and highlight Non DHCP DNS 1 and press the select soft key. Then press the edit soft key. After
entering the IP address of the server, press ok.
10 Product Info
To view the parameters in the Product Info, press the Menu button and then press 10, or scroll down
until Product Info is highlighted and then press the select soft key. The information displayed cannot
be edited. The options on the Product Info menu are as follows:
•
•
•
•
•
•
10.1 Product Name
Shortcut: Menu, 10, select
To view the Product Name, press the Menu button and press 10, or scroll down to the Product Info
menu, and press the select soft key. The Product Name is also printed on the bottom of the phone.
10.2 Serial Number
Shortcut: Menu, 10, 2, select
To view the Serial Number, press 2 from the Product Info menu, or scroll down to highlight Serial
Number and press the select soft key. The serial number is also printed on the bottom of the phone.
10.3 Software Version
Shortcut: Menu, 10, 3, select
To view the software version, press 3 from the Product Info menu or scroll down to highlight Software
Version and press the select soft key.
Document Version 3.0
ip_address , ok
10.1 Product Name
10.2 Serial Number
10.3 Software Version
10.4 Hardware Version
10.5 MAC Address
10.5 Client Cert
Linksys 900 Series IP Phone Administrator Guide
10 Product Info
4-11
Advertisement
Table of Contents
