Chassis Grounding; Wall-Mounting The Chassis; Wall-Mounting The Cisco 1841 Router - Cisco 1841 - 3G Bundle Router Hardware Installation Manual

Setting Up the Chassis

Chassis Grounding

After the router has been installed, you must connect the chassis to a reliable earth ground. For the
chassis ground connection procedure, see the
Router" section on page

Wall-Mounting the Chassis

The Cisco 1841 router and the Cisco 1861 ISR can be mounted on a wall.
This unit is intended to be mounted on a wall. Please read the wall mounting instructions carefully
Warning
before beginning installation. Failure to use the correct hardware or to follow the correct procedures
could result in a hazardous situation to people and damage to the system. Statement 248

Wall-Mounting the Cisco 1841 Router

To mount the Cisco 1841 router on a wall, use two number six, 3/4-inch screws and the mounting features
on the bottom of the router. You must provide the screws. We recommend using pan-head or round-head
screws.
The wall-mounting features on the router are shown in
Figure 4-4
1 1
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
4-6
Chapter 4
4-8.
Wall-Mounting Features on the Cisco 1841 Router
6.00 inches 6.00 inches
Chassis Installation Procedures for Cisco 1800 Series Routers (Modular)
"Wall-Mounting the Cisco 1861 Integrated Services
Figure 4-4.
OL-5876-03