Locating Modules - Cisco 1841 - 3G Bundle Router Hardware Installation Manual

Chapter 11 Installing and Upgrading Internal Modules in Cisco 1800 Series Routers (Modular)
Modules Internal to the Cisco 1841 Router
Figure 11-3 Removing the Cover of the Cisco 1841 Router
2
1
1 Slide cover back from router chassis 2 Rotate cover to remove from router chassis
Place the router bottom on an antistatic mat, and begin installing memory.
Step 7

Locating Modules

Figure 11-4 shows where the connector for the SODIMM or the AIM is located on the Cisco 1841
motherboard.
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
11-4
OL-5876-03