Cisco 1841 - 3G Bundle Router Hardware Installation Manual page 95

Chapter 11 Installing and Upgrading Internal Modules in Cisco 1800 Series Routers (Modular)
Figure 11-8
AIM end
Locking end
Insert the connector on the AIM into the AIM connector on the system board. See
Step 4
Note
Insert the screws from the accessory kit through the AIM into the metal standoffs. See
Step 5
Carefully tighten the screws with a Phillips screwdriver.
OL-5876-03
Plastic Standoff Orientation
Be sure to press firmly on the AIM until the board seats onto the connector. The plastic standoff
must snap into the hole in the AIM board. See Figure 11-9.
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
Modules Internal to the Cisco 1841 Router
Figure 11-9.
Figure 11-9.
11-9