Attaching Rack-Mount Brackets - Cisco 1841 - 3G Bundle Router Hardware Installation Manual

Setting Up the Chassis
Note To install a Cisco 1800 series modular-configuration router in a 19-inch rack, use the brackets included
in the optional rack-mount kit (SKU: ACS-1841-RM-19=).All Cisco 1841 chassis shipping since
Q4FY06 are rack-mountable. Cisco 1841 chassis with the following starting serial numbers have the
rack-mount screw holes: FTX1009W0Z3 (United States), FCZ100812UR (Europe, Middle East, and
Africa), and FHK100653JL (Asia Pacific).
Brackets for 23-inch equipment racks are not available for Cisco 1800 series modular-configuration
Note
routers.
Figure 4-1
Figure 4-1

Attaching Rack-Mount Brackets

Use four of the supplied number-8 Phillips flat-head screws to attach each bracket to the router.
Figure 4-2
Figure 4-2
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
4-4
Chapter 4
shows the brackets.
Rack-Mounting Brackets
shows how to attach the brackets to the sides of the router with the back panel forward.
Attaching Rack-Mounting Brackets to a Cisco 1800 Series Modular-Configuration
Router
C I S C O
1 8 4 1
10 0- 24 0
V A C -
1 A
50 /6 0 H
z
Chassis Installation Procedures for Cisco 1800 Series Routers (Modular)
OL-5876-03