Chapter 7 Power-Up Procedures For Cisco 1800 Series Routers (Modular); Powering Up Cisco 1800 Series Routers - Cisco 1841 - 3G Bundle Router Hardware Installation Manual

Power-Up Procedures for Cisco 1800 Series
Routers (Modular)
This chapter describes how to power up Cisco 1800 series integrated services routers (modular) and
perform an initial configuration to provide network access. It includes the following sections:
Powering Up Cisco 1800 Series Routers, page 7-1
Verifying the LED Indicators on the 1841 Router, page 7-4
Verifying the Hardware Configuration, page 7-5
Initial Configuration of the Router, page 7-5
Software Components of the Cisco 1861 Integrated Services Router, page 7-7
To see translations of the warnings that appear in this publication, see the
Note
Safety Information for Cisco 1840
The Cisco 1861 Integrated Services Router supports a maximum of 12 user licenses based on different
Note
models.

Powering Up Cisco 1800 Series Routers

The plug-socket combination must be accessible at all times because it serves as the main
Warning
disconnecting device. Statement 1019
Blank faceplates and cover panels serve three important functions: they prevent exposure to
Warning
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029.
Caution To ensure adequate cooling, never operate the router unless the unit is completely closed.
OL-5876-03
C H A P T E R
Routers.
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
7
Regulatory Compliance and
7-1