Grounding The Chassis - Cisco ASR 5000 series Installation And Administration Manual

Chassis Installation
Step 6
Proceed to the Grounding the Chassis section that follows to ground the chassis.

Grounding the Chassis

Make sure that the chassis is properly grounded prior to installing any chassis sub-components or cards. The chassis and
the equipment rack or telecommunications cabinet that it is installed in must be connected to the same ground.
Caution:
its components.
There are two sets of grounding terminals located at the lower-rear of the chassis. The following figure and the table that
follows show the location of these terminals and provide specifications for the appropriate lug and cable size.
OL-24878-01
Failure to properly ground the chassis could result in personal injury and/or damage to the chassis and
Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄
Installing the Chassis ▀