Grounding The Chassis - Cisco 5100 Series Hardware Installation Manual

Enterprise network compute system

Hide thumbs Also See for 5100 Series:

Table of Contents

Grounding the Chassis

Figure 8: Wall Mounting the Server

Step 2

Fix the chassis to the wall using the brackets that you attached to the device.

The screws for attaching the device to the wall are not provided with the kit. Depending on the type of wall (wood, brick,

stone etc), use appropriate screws to fix the device to the wall.

Route the cables so that they do not put a strain on the connectors or mounting hardware. You can only mount

Note

chassis with ports going out in left or right direction. Do not mount the chassis with ports facing upward or

downward direction.

Grounding the Chassis

Warning

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence

of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician

if you are uncertain that suitable grounding is available. Statement 1024

These are the steps to install the ground connection for the device:

Cisco 5100 Enterprise Network Compute System Hardware Installation Guide

Installing the Device

Table of Contents